Group A: (Non-Student
Poster Presenters, Numbers P100 to P
287)
--- Posters are sorted by country of presenting author ---
August 26, 2009 from 5.30 pm 7.15 pm - GALLERY HALL MARITIM Hotel
Following are the presenters in italics
Effect Of Dopes On Hydrogen Behaviour In Rapidly Solidified Aluminium Foils
I. Tashlykova-Bushkevich, T. Shikagawa, T. Suzuki, V. Shepelevich, G. Itoh, (Belarusian State University of Informatics and Radioelectronics, Belarus) [P100]
Impact Of An External Magnetic Field On The ?-d PHASE Transition In Pure Iron
M. Seefeldt, J. Rödel, P. Bocher, (K. U. Leuven, Belgium) [P101]
Experimental And Numerical Analysis Of Surface Defects Evolution In Axisymmetric Bar Drawing
Frederico de Castro Magalhães, P. R. Cetlin, H. B. Campos, A. E. M. Pertence, M. T. P. Aguilar, (Federal University of Minas Gerais, Brazil) [P102]
Influence Of Continuous Annealing Conditions On The Microstructure Of A C-Mn Dual Phase Steel
R. O. Rocha, T. M. F. Melo, D. B. Santos, (Quality and Technical Assistance Superintendence, Brazil) [P103]
EBSD Characterization Of Pure Iron Deformed By ECAE
M. J. R. Sandim, R. A. Renzetti, H. R. Z. Sandim, K. T. Hartwig, H. H. Bernardi, D. Raabe, (Universidade de São Paulo, Brazil) [P271]
On The Ability Of Imatinib Mesylate To Inhibit Smooth Muscle Celle Proliferation Without Delaying Endothelialization
G. Laroche, K. Vallieres, E. Petitclerc, (Université Laval, Canada) [P278]
How To Assess The Biological Performances Of Biodegradable Metallic Materials For Stents
A. Purnama, H. Hermawan, M. Moravej, J. Couet, D. Mantovani, (Laval University, Canada) [P104]
The Influence Of Hydrolysis On The Deposition And Corrosion Protection Of 3-Mercaptopropyltrimethoxysilane On Mg Alloy AZ91
A. Scott, J. Gray-Munro, J. Shepherd, (Laurentian University, Canada) [P105]
The Structure And Its Dependence On The Magnetic Properties Of Ni5CoXCu95-X Alloys Produced By Mechanical Alloying And Subsequent Annealing
M. L. López, R. Koduri, D. Reyes, M. E. Gómez, P. Prieto, J. Jiménez, (Universidad de Concepcion, Chile) [P106]
Evaluation Of Fatigue Damage By X-Ray Diffraction Technique Of An Al-Alloy
V. Mentl, J. Fiala, V. Kolarik, (University of West Bohemia, Czech Republic) [P282]
Correlation Of Hydroxyapatite Hardness With Mechanochemical-Hydrothermal Preparation Conditions
E. A. Abdel-Aal, A. A. El-Midany, H. El-Shall, (Central Metallurgical Research & Development Institute, Egypt) [P107]
Preparation And Properties Of Elastomeric Polyurethane / Organically Modified Montmorillonite Nanocomposites
O. I. H. Dimitry, A. L. G. Saad, E. Abdalla, Z. Abdeen, (Egyptian Petroleum Research Institute, Egypt) [P108]
Effect Of Ca And Cu Additions On The Ageing Behaviour Of AZ91 Magnesium Alloy
Z. M. El-Baradie, A. Z. Abdel-Azim, M. Waly, (, Egypt) [P109]
Band Gap Control For (Fe, Ti)-Containing Mesoporous Silica Nanoparticles Using A Photo-Assisted Deposition (Pad) Method
I. A. Ibrahim, R. M. Mohamed, A. M. El-Toni, F. A. Harraz, (Central Metallurgical Research & Development Institute, Egypt) [P110]
Effect Of Casting Condition And Heat Treatment Cycles On Microstructure And One Mechanical Properties Of Al 356 – Alloys
M. A. Moustafa, (Central Metallurgical Research & Development Institute, Egypt) [P111]
Studies Of Electrical/Mechanical Properties And Activation Energies Of Poly(Vinyl Chloride)/Metal Filler Composities
A. L. G. Saad, O. I. H. Dimitry, H. A. Aziz, (National Research Centre, Egypt) [P112]
Static Strain Ageing In Some Austenitic Stainless Steels
T. Juuti, L. P. Karjalainen, R. Ruoppa, T. Taulavuori, (University Of Oulu, Finland) [P113]
Thermal Behaviour Of Steel Plate During Accelerated Cooling
J. Pyykkonen, D. Martin, M. C. Somani, P. Mäntylä, (University of Oulu, Finland) [P114]
Mechanical Behaviour Study Of Plasma Sprayed Hydroxyapatite Coatings Onto Ti6AI4V Substartes Using Scratch Test
D. Najjar, A. Behnamghader, A. Iost, S. Benayoun, (Biomaterials Laboratory, France) [P272]
An Investigation Of Fracture Origins In Heat-Treated Ti49Al47Cr2Nb2 Powder Compacts
M. Thomas, O. Berteaux, R. Valle, M. Raffestin, G. Hénaff, (ONERA/DMSM, France) [P116]
Effect Of Post Weld Friction Stir Processing On Corrosion Behavior And Mechanical Properties Of Friction Stir Welded Aa 2024-T3 Joints
U. Alfaro-Mercado, G. Biallas, (DLR-German Aerospace Center, Germany) [P118]
Proliferation And Migration Of Human Osteoblasts On Porous Three Dimensional Scaffolds
C. Bergemann, E. D. Klinkenberg, F. Lüthen, A. Weidmann, R. Lange, U. Beck, R. Bader, K. Schröder, J. B. Nebe, (University of Rostock, Germany) [P119]
Surface Improvement: Coatings From Cluster Materials
Ester Sala Bosch, Martin Köckerling, (University of Rostock, Germany) [P120]
A Dual Role Of Copper On The Surface Of Bone Implants
F. Lüthen, C. Bergemann, H. G. Neumann, A. Podbielski, R. Bader, J. Rychly, (Laboratory of Cell Biology, Germany) [P121]
Nucleation At Cube Bands During Recrystallization In Commercial Al Alloy
O. Sukhopar, C. Schäfer, G. Gottstein, (RWTH Aachen, Germany) [P122]
Industrial Research And Development With Synchrotron Radiation
T. Wroblewski, (HASYLAB, Germany) [P123]
The Effect Of Die Temperature On The Mechanical Properties Of Hot Pressed P/M Parts
Abolfazl Babkahani, Ali Haerian, (Ferdowsi University of Mashhad, Iran) [P128]
Nanocomposite Structure For Mechanical Stability Of Barrier Films Of Potential Use In Medical Field
N. Laidani, R.Bartali, G.Gottardi, V. Micheli, P.Cheyssac, (Fondacione Bruno Kessler - Centro Materiali e Microsistemi, Italy) [P287]
Carbon Nanostructures Produced By An Arc Discharge
D. Mirabile Gattia, M. Vittori Antisari, L. Brandão, R. Marazzi, A. Montone, (FIM, ENEA, Italy) [P280]
Discontinuos Precipitation In A High Nitrogen Austenitic Steel
L. Rovatti, A. Mezzi, S. Kaciulis, R. Montanari, N. Ucciardello, A. Carosi, (University of Rome, Italy) [P129]
Influence Of Annealing On Strength Of Ultrafine Grained Low Carbon Steels By Ecap
T. Akita, M. Gotoh, S. V. Dobatkin, K. Kitagawa, Y. Hirose, (Kanazawa University, Japan) [P130]
Chemical Vapor Synthesis Of Fibrous Carbon By Decomposition Of Ethylene Using Pd-Loaded Catalysts
T. Aoki, H. Gamo, K. Nakagawa, T. Ando, M. N. -Gamo, (Toyo University, Japan) [P131]
Microstructure And Compression Properties Of Al-Si Alloy Foams By Spark Plasma Sintering Technique
N. Aoyagi, S. Kamado, Y. Kojima, (Nagaoka National College of Technology, Japan) [P132]
Crystallographic Features Of Ferroelectric States Around The Tetragonal / Rhombohedral Phase Boundary In Pb1-xLax(Zr1-yTiy)O3
M. Arao, Y. Inoue, R. Ando, Y. Koyama, (NISSAN ARC, LTD, Japan) [P133]
Solubility Control Of aTCP –HAP Functionally Graded Porous Beads In Sbf For Biomaterial Use
T. Asaoka, Y. Kajihata, K. Furukawa, T. Ushida, T. Tateishi, (Tokyo Denki University, Japan) [P134]
Effect Of Grain Boundary Segregation Of Phosphorus On The Hall-Petch Coefficient Of Ferritic Iron
M. Fujihara, N. Nakada, T. Tsuchiyama, S. Takaki, (Nisshin Steel Co. Ltd., Japan) [P135]
Ambiguous Transition From Fretting To Sliding Of Biomedical Alloys
H. Fukuii, S. Tsuruta, M. Niinomi, T. Akahori, (Aichi-Gakuin University, Japan) [P136]
Properties Of Small Rotary Engine Housing Fabricated By Aluminum Alloy Matrix Composites
Nobuyuki Fuyama, Akira Terayama, Toshio Fujii, Hajime Tani, Shinji Danjo, Gen Sasaki, (Hiroshima Prefectural Technology Research Institute, Japan) [P137]
Influence Of Steel Grain Size On Residual Stress In Grinding Processing
M. Gotoh, K. Seki, M. Shouz, H. Hirose, T. Sasaki, (Kanazawa University, Japan) [P138]
Effect Of Trace Boron Addition On The Microstructure And Tensile Elongation Of Ti2AlNb-Based Orthorhombic Titanium Alloys
Masuo Hagiwara, Tomoyuki Kitaura, (Kyushu Institute of Technology, Japan) [P139]
Optical Diagnostics Of Deposition Process Of Ultrananocrystalline Diamond Films In Physical Vapor Deposition
K. Hanada, T. Yoshitake, T. Nishiyama, K. Nagayama, (Kyushu University, Japan) [P140]
Fracture Toughness Of A Silica-Doped Cubic Zirconia (8Y-CSZ)
K. Hiraga, K. Morita, B. -N. Kim, H. Yoshida, (National Institute for Materials Science, Japan) [P141]
Explosively Driven Expansion And Fragmentation Behaviour For Cylinders, Spheres And Rings Of 304 Stainless Steel
T. Hiroe, K. Fujiwara, H. Hata, M. Yamauchi, K. Tsutsumi, T. Igawa, (Kumamoto University, Japan) [P142]
Production Of Rapidly Solidified Composite Deposits Based On Iron With Vanadium Carbide Particles By Plasma Spraying
Y. Hoshiyama, K. Hirano, H. Miyake, (Kansai University, Japan) [P143]
Influences Of Rolling Conditions On Texture And Formability Of Magnesium Alloy Sheets
X. S. Huang, K. Suzuki, A. Watazu, I. Shigematsu, N. Saito, (National Institute of Advanced Industrial Science and Technology (AIST), Japan) [P144]
Effect Of Deformation Mode On Texture Of Ultrafine-Grained Low Carbon Steel Processed By Warm Caliber Rolling
Tadanobu Inoue, Fuxing Yin, Yuuji Kimura, (National Institute for Materials Science, Japan) [P145]
Stability Of The Orbital-Modulated State In The Layered Perovskite Manganite Sr2-xRxMnO4 (R = Nd, Pr)
Y. Inoue, M. Arao, G. Shindo, Y. Koyama, (Nissan ARC LTD, Japan) [P146]
Effect Of Environmental Friendly Anodizing On The Mechanical Properties And Microstructure Of AZ Magnesium Alloys
T. Kanadani, S. Hikino, A. Saijo, M. Hino, K. Murakami, (Okayama University of Science, Japan) [P147]
Microstructure And Magnetic Properties Of NdFeB Magnets Using Fluolides Nano-Coated Process
M. Komuro, Y. Satsu, H. Suzuki, (Hitachi Ltd, Japan) [P148]
Dislocation Substructure Of Single Crystal Ni-Based Superalloy, CMSX-4, Crept At 1073-1273K And 250-600MPa
Y. Kondo, N. Miura, (National Defense Academy, Japan) [P149]
Mechanical Alloyed and Spark Plasma Sintered Al- Presious Metal Oxide Composite Materials
Masahiro Kubota, Pavel Cizek, (College of Industrial Technology, Japan) [P150]
Heating Behaviors Of Powdered Metal Silicon Compact Under Microwave Irradiation
Yoshihiko Kunieda, Hiroshi Shimofuruya, Tomoyuki Tanigawa, Yasuyuki Ito, (Suzuka National College of Technology, Japan) [P151]
Phase-Separation Of B2 Precipitates In An Fe-Ni-Al Alloy
Y. Kuno, Y. Nakane, T. Kozakai, M. Doi, J. Yamanaka, C. Yamamoto, S. Naito, (Nagoya Institute of Technology, Japan) [P152]
Morphology Of g’ Precipitates In Second Stage High Pressure Turbine Blade Of Single Crystal Nickel-Based Superalloy After Serviced
N. Miura, K. Nakata, M. Miyazaki, Y. Hayashi, Y. Kondo, (National Defense Academy, Japan) [P153]
Effect Of Alumina Fibers On Fabrication Process And Characteristics Of Alumina Fiber Reinforced Aluminum Alloy Composites
M. Mizumoto, T. Ohgai, A. Kagawa, (Nagasaki University, Japan) [P154]
Early Stage Of Phase Separation Behaviour Of G’ Precipitates In Ni-Al-Ti Alloys
Tomokazu Moritani, Akiyoshi Hakamada, Takao Kozakai, Minoru Doi, (Nagoya Institute of Technology, Japan) [P155]
Bonding And Separation Behaviors Between Ti-Sn Alloys And Iron Materials
Y. Morizono, S. Nakatsukasa, M. Nishida, (Kumamoto University, Japan) [P156]
Corrosion Protection And Microstructure Of Magnesium Alloys Anodized By Phosphate Solution
K. Murakami, M. Hino, A. Saijo, T. Kanadani, (Okayama Prefectural Government, Japan) [P157]
Fracture Process Of Aluminum/Aluminum Nitride Interfaces During Thermal Cycling
Yoshiyuki Nagatomo, Ryo Muranaka, Hiromasa Hayashi, Yoshirou Kuromitsu, Noriyuki Kuwano, (Mitsubishi Materials Corporation, Japan) [P158]
Nucleation And Growth Process Of Sn Whisker Under Tensile Stress In Bulk Sn
K. Nakai, T. Sakamoto, S. Kobayashi, M. Takamizawa, K. Murakami, M. Hino, (EHIME UNIVERSITY, Japan) [P159]
The Effect Of H2S Addition On The Crystal Quality Of The Nanocrystalline Diamond Films Grown By The Down-Flow Microwave Plasma-Assisted Chemical Vapor Deposition
M. Nishitani-Gamo, H. Gamo, M. Kikuchi, K. Shimada, T. Ando, M. Nishitani-Gamo, (Toyo University, Japan) [P160]
Stress Simulation And Retaled Bone Ingrowth In Grooves On Implant
Yoshihiro Noyama, Noriyuki Nagayama, Takuya Ishimoto, Koichi Kuramoto, Takashi Sakai, Hideki Yoshikawa, Takayoshi Nakano, (Nakashima Propeller Co., Ltd, Japan) [P161]
Preferred Orientation Of Cu2O Nano/Micro-Protrusion Grown By Air Ion Irridation
Shogo Oda, Hiroyuki Tanaka, Shun-ichiro Tanaka, (Tohoku University, Japan) [P162]
Cutting Mechanism Of Resin Impregnated Sintered Iron
K. Okimoto, (Setsunan University, Japan) [P163]
Internal Residual Strain Of Glidcop For The Material Of The High-Heat-Load Components
M. Sano, S. Takahasi, A. Watanabe, H. Kitamura, K. Kiriyama, T. Shobu, (Japan Synchrotron Research Institute, Japan) [P164]
Fatigue Behavior Of Ni-Nb-Ti-Zr-Co-Cu Metallic Glass
Y. Saotome, J. Hacho, M. Ishida, H. Takeda, N. Nishiyama, A. Inoue, (Tohoku University, Japan) [P165]
Thin Film Depositions Of Several Compound Semiconductors On Amorphous And Single Crystal Substrates And Comparisons Of Their Properties
Y. Sato, (Akita University, Japan) [P166]
Second Phase Precipitation Within A Laves Phase In The Ir-Y Binary System
N. Sekido, Y. Yamabe-Mitarai, (National Institute for Materials Science, Japan) [P167]
Microstructure And Thermoelectric Properties Of Al-Doped ZnO Sintered Body
Noboru Shikatani, Tatsuya Misawa, Yuji Kawakami, Michihiro Ohta, (Fukuoka Institute of Technology, Japan) [P168]
Creep Behavior And Microstructure Of 8cr Oxide Dispersion Strengthend Martensitic Steel
K. Shinozuka, H. Esaka, M. Tamura, H. Tanigawa, (National Defense Academy, Japan) [P169]
Measurement Of Micro Residual Stresses Near The Grain Boundary In Copper Bicrystal
A. Shiro, T. Hanabusa, T. Okada, M. Nishida, K. Kusaka, O. Sakata, (The University of Tokushima, Japan) [P170]
A New Fabrication Technique By Use Of Room-Temperature Bonding For Developing Quasi-Phase-Matched Nonlinear Frequency-Conversion Devices
I. Shoji, M. Kawaji, K. Imura, T. Yaguchi, (Chuo University, Japan) [P171]
Effect Of Mg Addition On The Mechanical Properties Of Rapidly Solidified Al-Mn Alloys At Elevated Temperatures
M. Sugamata, A. Tomioka, Y. Kubota, (Nihon University, Japan) [P172]
Internal Stress In EB-PVD Thermal Barrier Coating Under Heat Cycle
K. Suzuki, T. Shobu, (Niigata University, Japan) [P173]
Residual Stress Evaluation Of Wheels By Both Neutron Diffraction And Finite Element Methods
S. Takahashi, T. Kato, H. Suzuki, T. Sasaki, (Kanazawa University, Japan) [P174]
Formation Of Martensite Austenite Constituent In Continuously Cooled Nb-Bearing Low Carbon Bainitic Steels
N. Takayama, G. Miyamoto, H. Nako, T. Maki, T. Furuhara, (Tohoku University, Japan) [P249]
Crystal Growth And Characterization Of Feas-Based Superconductors
H. Takeya, S. Kasahara, K. Hirata, (National Institute for Materials Science, Japan) [P175]
Effect Of Additional Elements On S-Phase Of Austenitic Stainless Steel
Masato Tsujikawa, Motoo Egawa, Nobuhiro Ueda, Takumi Sone, Kazuhiro Nakata, (Osaka Prefecture University, Japan) [P176]
High Temperature Internal Friction Behaviour Of Unidirectionally Solidified Al2o3/Yag Eutectic
Shunkichi Ueno, Satoshi Takata, Yasuhiro Tanabe, Takashi Akatsu, Katsumi Suda, Eiichi Yasuda, Yoshiharu Waku, (Osaka University, Japan) [P274]
Cutting Performance Of Diamond-Like Carbon Coated Tool In Cutting Of Aluminum Alloys
Tadahiro Wada, (Nara National College of Technology, Japan) [P275]
Effect Of Weld Tip Geometry On Ultrasonic Welding Of Aluminium Alloy
T. Watanabe, K. Nishihara, A. Yanagisawa, (Niigata University, Japan) [P177]
Rotary-Die Equal Channel Angular Pressing Method For Light Metals
A. Watazu, I. Shigematsu, M. Hakamada, K. Suzuki, X. S. Huang, N. Saito, (National Institute of Advanced Industrial Science and Technology, Japan) [P178]
Thermal Stability Of Nano-Sized Nickel Particles On Alumina Synthesized By Solution-Spraying Plasma Method
J. Yamanaka, M. Kimura, C. Yamamoto, H. Yamashita, H. Uchida, M. Watanabe, (University of Yamanashi, Japan) [P179]
Optical Diagnostics Of Deposition Process Of Ultrananocrystalline Diamond Films In Physical Vapor Deposition
T. Yoshitake, S. Ohmagari, A. Nagano, S. AL-Riyami, R. Ohtani, H. Setoyama, E. Kobayashi, T. Hara, K. Nagayama, (Kyushu University, Japan) [P181]
Microstructures And Desification Of Titanium Powders After Roll Compaction
Jae-Keun Hong, JONG-TAEK YEUM, JEOUNG-HAN KIM, NHO-KWANG PARK, (Korea Institute of Materials Science, Korea) [P182]
Grain Refinement Of Vanadium By Low Temperature Severe Plastic Deformation
S. K. Hwang, Y. B. Cen, S. H. Ahn, D. H. Shin, (Inha University, Korea) [P283]
Characterization Of FePt Nanopowder Synthesized By A Chemical Vapor Condensation (CVC) Process
T. S. Jang, J. H. Yu, D. W. Lee, B. K. Kim, (Sun Moon University, Korea) [P183]
Effect Of Omega Precipitation On Elastic Behavior Of Bcc Matirx With Temperature In Single Crystal Ti-Nb Alloy
H. W. Jeong, J. K. Park, W. H. Yoon, C. Y. Jo, Y. T. Lee, (Korea Institute of Materials Science, Korea) [P184]
Porous Carbon Fiber Containing Treated-Magnesium Oxide By Melt-Spinning Method
D. H. Jung, K. D. Nam, S. Y. Lim, S. -K Kim, (Korea Institute of Energy Research, Korea) [P186]
Carbon Black-Carbon Nanofiber Composites As A Support Of The Catalyst For A Direct Methanol Fuel Cell
Doohwan Jung, Sang-Min Park, Seongyop Lim, Sang-Kyung Kim, Donghyun Peck, Seong-Hwa Hong, Won Hi Hong, (Korea Institute of Energy Research, Korea) [P187]
Development Of Continuous Casting And Rolling For Aluminum Alloy Wire & Rod
M. G. Kim, G. C. Lee, JP. Park, J. H. Kim, (RIST, Korea) [P188]
Effect Of Heat Treatment On Mechanical Properties Of Super Duplex Stainless Steel
Sun Mi Kim, Kwang Tae Kim, Yong Deuk Lee, Chong Soo Lee, (POSTECH, Korea) [P189]
Impact Property Of Ferritic/Martensitic Steels For The Reactor Pressure Vessel Of A Very High Temperature Gas Cooled Reactor
Sung Ho Kim, Chang Hee Han, Ji-Hyun Yoon, Woo Seog Ryu, (Korea Atomic Energy Research Institute, Korea) [P190]
Effect Of Rare Earth Element On Microstructure And Mechanical Properties Of Mg-Sn-Ca Alloys
Jae-Seol Lee, Seul-Ki Park, Dae-Guen Kim, Young-Mo Kim, Hyeon-Taek Son, (Korea Institute of Industrial Technology (KITECH), Korea) [P191]
Characteristic Of PEM Fuel Cell Bipolar Plate Using Surface Treated Carbon Steel As Substrate
D. G. Nam, Y. D. Park, Y. S. Kim, H. H. Jo, (KITECH, Korea) [P192]
Evolution Of g/g¢ Eutectic Islands During The Solidification Of Advanced Ni-Base Superalloys CMSX-10 and CMSX-4
S. M. Seo, J. H. Lee, C. Y. Jo, H. Miyahara, K. Ogi, (Korea Institute of Materials Science, Korea) [P194]
Synthesis Of Nanocrystalline Sm2Fe17N Magnetic Powder By Solid State Reduction-Diffusion Process
J. C. Yun, S. S. Jung, J. G. Lee, C. J. Choi, J. S. Lee, (Hanyang University, Korea) [P185]
Celular Structures Construction Through Voronoi Cells And Their Implementation In Trabecular Bone Modeling
Rafael Schouwenaars, Osvaldo Ruiz, Edgar I. Ramírez, Armando Ortiz, (National Autonomus University of Mexico, Mexico) [P195]
Solute Depletion During Low Temperature Ageing In AA2024
D. D. Risanti, S. van der Zwaag, (Materials Innovation Institute, Netherlands) [P196]
Barrier Free Heterogenous Grain Nucleation In Polycrystalline Materials The Austenite To Ferrite Phase Transformation In Steel
N. H. Van Dijik, (Delft University of Technology, Netherlands) [P197]
Procesing-Property Relationships Of As-Cast Magnesium Foams With Contrallable Architecture
M. P. Staiger, N. T. Kirkland, I. Kolbeinsson, T. Woodfield, G. Dias, (University of Canterbury, New Zealand) [P279]
Precipitate Behaviour And Microstructure Characterization Of An Al-Zn-Mg-Cu Alloy Prepared By Spray Forming Process
Xiong Baiqing, Udo Fritsching, Jishan Jang, Yongan Zhang, Baohong Zhu, Feng Wang, Hongwei Liu, Zhihui LIu, (State Key Laboratory for Fabrication and Processing of Non-ferrous Metals, P.R. China) [P198]
On The Plastic Flow Behaviour of Ti-6Al-4V Alloy During Multi-stand Tandem Hot Rolling
L. Q. Chen, S. Liang, X. H. Liu, (Northeastern University, Shenyang, P.R. China) [P281]
Nanoscale Structure And Magnetic Properties Of Nd-Fe-Nb-Zr-B Permanent Magnets
W. Y. Chen, X. F. Wang, Zh. L. Jiang, W. Y. Qin, Zh. D. Ling, H. M. Chen, (Tsinghua University, P.R. China) [P199]
The Response Of Pzt To A Dynamic Compressive Loading
X. L. Dong, G. Yu Zhou, Li-li Wang, (Ningbo University, P.R. China) [P200]
Mn-Series Low Carbon Air Cooling Bainitic Steels Containing Niobium
Chun Feng, Bing-Zhe BAI, Yan-Kang ZHENG, Hong-Sheng FANG, (Tsinghua University, P.R. China) [P201]
Study On Very High Cycle Fatigue Fracture Of High Strength Steel With Cfb/M Complex Microstructure
J. L. Gu, Y. Yu, BZ. Bai, (Tsinghua University, P.R. China) [P202]
Modified Nearly-Free-Electron Model: Description Of Glass Forming Ability Of Transition Metal-Metalloid Binary Glasses
X. L. Li, X. F. Bian, L. N. Hu, H. Li, (Shandong University, P.R. China) [P203]
Size-Dependent Indentation Pressure Probed In Porous Alumina1
Z. Ling, (Chinese Academy of Sciences, Beijing, P.R. China) [P204]
Deformation Of Anodic Aluminium Oxide Nano-Honeycombs During Depth-Sensing Indentation
K. Y. Ng, Y. Lin, A. H. W. Ngan, (The University of Hong Kong, P.R. China) [P205]
The Crystallization Behaviors Of Al-Metallic Galsses
Kaikai Song, Xiufang Bian, (Shandong University, P.R. China) [P206]
Preparation And Characterization Of Nanoscale Rare-Earth Metals And Alloys With High Properties
X. Song, N. Lu, E. Li, J. Zhang, (Beijing University of Technology, P.R. China) [P207]
Study On The Formability And The Correlation Between Formability Indices Of Al-0.9mg-1.0si-0.7cu-0.6mn Alloy Sheets For Automotive Body Sheets
N. Tian, G. Zhao, L. Zuo, C. M. Liu, (Northeastern University, P.R. China) [P208]
Microstructure And Texture Study On Recrystallization Of Ti-Nb-Ta-Zr-O Alloy
H. H. Wang, W. Y. GUO, H. Xing, R. Chen, (Shanghai JiaoTong University, P.R. China) [P209]
Evolution Of Residual Stress In Cu-Line Patterns With Different Linewidth
Jianfeng Wang, Dayan Ma, Kewei Xu, (Xi’an Jiaotong University, P.R. China) [P210]
Recrystallization Behavior Of Gh4586 Superalloy During Hot Compression
Lei Wang, Shuai Wang, Yang Liu, (Northeastern University, P.R. China) [P211]
Friction Stir Welding Of Sic Particle Reinforced Aluminum Matrix Composite To Aluminum Alloy
B. L. Xiao, Z. Y. Ma, J. Bi, (Chinese Academy of Sciences, P.R. China) [P212]
Evolution Of Residual Stress In Cu-Line Patterns With Different Linewidth
Kewei Xu, Jianfeng Wang, Dayan Ma, Ming Liu, (Xi’an Jiaotong University, P.R. China) [P213]
Simulation Of Superhard Materials Grinding Based On Virtual Reality
T. B. Yu, Y. D. Gong, H Li, J. Y. Yang, W. S. Wang, (Northeastern University, P.R. China) [P214]
Coupled Filed Numerical Simulation Of Fluid And Heat In Rheocasting-Rolling For Semi-Solid Magnesium Alloy Used By Slope
Haibo Zhao, Zhang Ying, Shuisheng XIE , Maopeng Geng , Hongmin Guo , Jinhua Xu, (Nanchang University, P.R. China) [P216]
Strengthening And Softening Of Ferrite-Pearlite Steel Produced With Thin Slab Continuous Casting And Rolling (TSCR) Process
Chai Yi Zhong, Fu Jie, M. Xinping, W. Hujie, Liu Yang Chun, (Guangzhou Zhijiang Steel Co,, P.R. China) [P284]
Numerical Simulation Of Steel Flow And Behaviour Of Non-Metallic Inclusions In The Six-Strand Tundish With Stopper Rod System
A. Cwudzinski, J. Jowsa, (Czestochowa University of Technology, Poland) [P217]
Phases And Structure Characteristics Of The Near Eutectic Al-Si-Cu Alloy Using Derivative Thermo Analysis
L. A. Dobrzansk, M. Krupinski, K. Labisz, B. Krupinska, (Silesian University of Technology, Poland) [P218]
Structural Analysis Of Hydroxyapatite Sinters With Addition Of Zr02 Phase
A. Dudek, Z, Nitkiewicz, (Czestochowa Technical University, Poland) [P219]
Structural Analysis Of Sintered Materials Used For Low-temperature Fuel Cell Plates
A. Dudek, R. Wlodarczyk, Z. Nitkiewicz, (Czestochowa Technical University, Poland) [P273]
Unconventional Assisting Of Plasma Nitriding Process Of The Austenitic Steel Grade 316L
T. Fraczek, (Technical University of Czestochowa, Poland) [P220]
Multi-Scale Cafe Modelling Of Dynamic Recrystallization In Austenitic Steel
J. Gawad, D. Kuc, M. Pietrzyk, (University of Science and Technology, Poland) [P221]
Microstructure Evolution Of C-Mn-Si-Al-Nb High-Manganese Steel During The Thermomechanical Processing
A. Grajcar, L. A. Dobrzanski, W. Borek, (Institute of Engineering Materials and Biomaterials, Poland) [P222]
The Microstructure Change During Modeling Of Conventional And Thermo-Mechanical Rolling Of S355 Steel Bars
Stradomski Grzegorz, Dyja Henryk, Stradomski Zbigniew, (Technical University of Czestochowa, Poland) [P223]
Technical – Economic Analysis Of Pig Iron Production
Edyta Kardas, (Czestochowa University of Technology, Poland) [P224]
The Analysis Of The Asymmetric Plate Rolling Process
A. Kawalek, (Technical University of Czestochowa, Poland) [P225]
Microstructure And Creep Properties Of Die-Cast Of AJ62 And AE44 Magnesium Alloys
A. Kielbus, T. Rzychon, (Silesian University of Technology, Poland) [P285]
The Physical Simulation Of The Normalizing Rolling Of The Steel Plate In Strength Category 350÷460MPa
M. Knapinski, B. Koczurkiewicz, A. Kawalek, H. Dyja, (Technical University of Czestochowa, Poland) [P226]
The Analyze Of Phase Transformations In Ultra Fine Grained Constructional Steel
B. Koczurkiewicz, H. Dyja, Knapinski, (Technical University of Czestochowa, Poland) [P227]
High-Temperature Researches Of Properties Of Blast Furnace Coke
Anna Konstanciak, (Technical University of Czestochowa, Poland) [P228]
Relaxation Of Residual Stresses Caused By Pulsed Electric Current
L. Kruszka, G. Stepanov, A. Babutsky, (Military University of Technology, Poland) [P229]
The Influence Of Deformation Conditions On Structure Of FeAl Intermetallic Phase - Based Alloys
D. Kuc, G. Niewielski, (Silesian University of Technology, Poland) [P230]
Influence Of The Rolling Temperature On The Energy And Force Parameters During The Round Bars Normalizing Rolling Process
K. Laber, H. Dyja, S. Mróz, (Czestochowa University of Technology, Poland) [P231]
Comparison Of Structure And Properties Of Hard Coatings On Commercial Tool Materials Manufactured With The Pressureless Forming Method Or Laser Treatment
G. Matula, M. Bonek, L. A. Dobrza?ski, (Silesian University of Technology, Poland) [P232]
Microstructure And Thermal Diffusivity Of Micro- And Nano Sized YSZ
G. Moskal, (The Silesian University of Technology, Poland) [P233]
Dsc And Microstructural Investigations Of Elektron 21 Magnesium Alloy
T. Rzychon, A. Kielbus, R. Przeliorz, (Silesian University of Technology, Poland) [P286]
Influence The Thermal Process Of The Removing The Varnish Coats To The Cleanness Of The Surface Aluminium Scrap
Jerzy Siwka, (Czestochowa University of Technology, Poland) [P277]
Optimization Of Heat Treatment Conditions Of Magnesium Cast Alloys
T. Tanski, L. A. Dobrzanski, J. Trzaska, (Silesian University of Technology, Poland) [P234]
Mechanism Of Failure Of Axisymmetrical Welded Joint Undergoing Thermomechanical Loadings
Kwiryn Wojsyk, AndrzejSluzalec, Piotr Lacki, (Technical University of Czestochowa, Poland) [P235]
Crystallographic Textures Variation In Asymmetrically Rolled Steel
S. Wronski, K. Wierzbanowski, B. Bacroix, M. Wróbel, M. Wronski, (AGH University of Science and Technology, Poland) [P276]
Magnetostrictive Properties Of Epoxy-Bonded Tb0,3Dy0,7Fe1,9 Composites
A. Wydrzynska, L. A. Dobrzanski, O. Lesenchuk, R. Zuberek, (Silesian University of Technology, Poland) [P236]
Study And Researches About The Microhardness’s Variation Of A Special S.G. Cast Iron
I. Milosan, (Transilvania University of Brasov, Romania) [P237]
Recrystallization Mechanisms In Severely Deformed Dual-Phase Stainless Steel
A. Belyakov, R. Kaibyshev, Y. Kimura, K. Tsuzaki, (Belgorod State University, Russia) [P238]
Creep Behavior Of An Oxide Dispersion Strengthened Iron With Ultrafine Grain Structure
V. Dudko, R. Kaibyshev, A. Belyakov, Y. Sakai, K. Tsuzaki, (Belgorod State University, Russia) [P239]
Orientation Relations Between Austenite And Structural Components Of Pearlite In Carbon Steel
L. Karkina, I. Yakovleva, (Institute of Metal Physics, Russia) [P240]
Microstructure Evolution In A 3%Co Modified P911 Heat Resistant Steel Under Creep Conditions
A. Kipelova, R. Kaibyshev, I. Schenkova, V. Skorobogatykh, (Belgorod State University, Russia) [P241]
Superplasticity Of Sc And Zr Modified Microcrystalline Al-6%Cu Alloy Subjected To ECAE
I. Nikulin, R. Kaibyshev, Y. Motohashi, S. Mironov, Y. S. Sato, H. Kokawa, (Belgorod University, Russia) [P242]
Technologies Of Nanomodification Of Low-Carbon Low Alloyed Steels
V. V. Orlov, V. A. Malyshevsky, E. I. Khlusova, (Federal State Unitary Enterprise Central Research Institute of Structural Materials, Russia) [P243]
Microstructure Evolution In A 9%Cr Heat Resistant Steel During Creep Tests
V. Skorobogatykh, I. Schenkova, V. Dudko, A. Belyakov, R. Kaibyshev, (Central Research Institute for Machine-Building Technology, Russia) [P244]
Structure Of Carbon Steel After High-Temperature Deformation
I. Yakovleva, L. Karkina, V. Urtsev, Yu. Khlebnikova, (Russian Academy of Sciences, Russia) [P245]
Thermo-Mechanical Problem Of Torque In Beam With Annular Cross-Section
J. Stropnik, F. Kosel, (University of Ljubljana, Slovenia) [P246]
Surface Hardening Of Ti6Al4V By Solar Nitriding
G. Herranz, G. Matula, I. Sánchez, G. Rodríguez, (Universidad de Castilla-La Mancha, Spain) [P247]
Study Of A«B Transformation In Ti-6Al-4V-ELI Mechanical And Microestructural Characteristics
P. Tarin, A. Gualo, A. G. Simón, N. M. Piris, J. M. Badka, (University Politécnica de Madrid, Spain) [P248]
Effects Of Thermal Annealing On Electrical, Optical And Structural Properties Of Ga-Doped ZnO Films
P. C. Chang, K. H. Lee, A. N. Tu, S. J. Chang, K. J. Lee, (Nan Jeon Institute of TechnologyYen-Hsui Township, Taiwan) [P250]
Magnetic Properties, Nanostructure And Ordering Kinetics Of Nb Additive FePtCu Thin Films
H. W. Chen, G. J. Chen, Y. H. Shih, J. S. C. Jang, P. H. Tsai, S. R. Jian, (I-SHOU University, Taiwan) [P251]
Thermal And Mechanical Properties Of The (CU36Zr48AL8Ag8)100-xSix (X=0-1) Amorphous Alloys
Y. -T. Chen, N. - Y-Wu, C. -J Hseih, Jason S. -C Jang, S. -R Jian, (I-Shou University, Taiwan) [P252]
Enhanced Thermal Stability Of A Zralcuni Amorphous Alloy System With Gd Doping
Yuan-Tsung Chen, Chia-Jin Hsieh, Sheng-Rui Jian, Jason Shian-Ching Jang, (I-Shou University, Taiwan) [P253]
Highly Thermal-Stable Ultrathin Ta-Si-C Amorphous Film As A Diffusion Barrier For Cu Interconnection
Jau-Shiung Fang, Chin-Fu Chiu, (National Formosa University, Taiwan) [P254]
Effects Of In-Situ Formation Of Nanoscaled Alumina On Tensile Properties Of Al-ZNO Composites Fabricated By Friction Stir Process
N. J. Ho, C. M. Hu, C. M. Lai, P. W. Kao, L. W. Chang, (National Sun Yat-sen University, Taiwan) [P255]
Fabrication Of Composite Biomaterials Made Of Basic And Acidic Polysaccharides
Hsyue-Jen Hsieh, Po-Hui Chen, Nai-Yi Yuan, Yin-An Chen, Ting-Yun Kuo, Da-Ming Wang, Juin-Yih Lai, (National Taiwan University, Taiwan) [P256]
Experimental Investigation And Thermodynamic Calculation Of Zr-Cu-Ni-Al Phase Equilibria Including Two-Liquid Miscibility Phase Reaction
K. C. Hsieh, M.C. Yeh, J. C. Huang, (National Sun Yat-Sen University, Taiwan) [P257]
Stress Analysis on the Stretch Forming of the Aluminium Saddle-shaped Skins
Chikong Huang, Chau-Chen Torng , Hsien-Ming Chang, (National Yunlin University of Science & Technology, Taiwan) [P258]
Effect Of Calcining Temperature Of Ceramic Powders Prepared From Teos/Boehmite Sol-Gel On Tribological Behavior Of Brake Lining Materials
K. J. Lee, Y. T. Chen, H. Z. Cheng, J. S. C. Jang, P. C. Chang, S. W. Lin, Y. D. Chen, (I-SHOU University, Taiwan) [P259]
Preparation And Characterization Of High Water Content Hyaluronic Acid Hydrogel
S. W. Tsai, F. Y. Hsu, Z. L. Lee, (Chang Gung University, Taiwan) [P261]
Synthesizing Mg Bulk Metallic Glasses Via Powder Route
Chi Y. A. Tsao, Shang K. Fan, J. C. Huang, J. S. C. Jang, (National Cheng Kung University, Taiwan) [P262]
Charactersitics Of Ti-6 Al-4v Alloy Surface Modified By Plasma Immersion Ion Implantation For Biomedical Applications
R. Tsay, G. P. Chou, W. F.Tsai , C. F. Ai, (National Yang Ming University, Taiwan) [P263]
Microstructural Development During Tempering Df Carbide-free Bainite
A. Saha Podder, H. K. D. H. Bhadeshia, (University of Cambridge, Cambridge, U.K.) [P264]
Comparison Of Single And Two-Stage Inertia Friction Welding Of A Nickel-Base Superalloy
M. Preuss, B. Grant, G. Baxter, M. Rowlson, (University of Manchester, U.K.) [P265]
Multicomponent Solid State Hydrogen Storage Materials
Gavin S. Walker, (University of Nottingham, U.K.) [P266]
Weldability Study Of Aluminum Alloys Using Weld Simulation And Complimentary Variable Restraint Testing
D. B. Gibbs, D. W. Walsh, (California Polytechnic State University, USA) [P267]
Towards Understanding The Microstructure Development During Flash Heating And Cooling Of Steels
T. Lolla, B. Alexandrov, S. S. Babu, G. Cola†, (Ohio State University, USA) [P268]
Thermomechanical Process Innovation And Optimization Via Computer Modeling And Simulation
P. A. Manohar, (Robert Morris University, USA) [P269]
A Weldability Study Of Nickel–Iron-Cobalt Hydrogen Resistant Alloys Using Weld Simulation In Parallel With Variable Restraint Testing
D. W. Walsh, M. L. Bright, T. L. Jackson, D. B. Gibbs, (California Polytechnic State University, USA) [P270]
|
- Co-sponsored by The Minerals, Metals & Materials Society